Review




Structured Review

Rsoft Inc cad layout in diffractmod 3.1
Cad Layout In Diffractmod 3.1, supplied by Rsoft Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/diffractmod+3%2E1/diffractmod+3+1/pm36577167-103-44-40
Average 90 stars, based on 1 article reviews
cad layout in diffractmod 3.1 - by Bioz Stars, 2026-11
90/100 stars

Images

Related Articles

Polymer:

Article Title: Broadband and wide-angle antireflective characteristics of nanoporous anodic alumina films for silicon-based optoelectronic applications
Article Snippet: technological interest in most of the above applications [1–6].. In these applications, it is very crucial to enhance the light extraction or absorption efficiency of the devices.. However, a flat Si surface has high inherent reflectivity of >30 % due to its high refractive index (nSi > 3.4) at visible and near-infrared (NIR) wavelengths, which can degrade the device performance due to the optical losses caused by the Fresnel surface reflection.

Article Title: Nanoporous TiO2-Based Distributed Bragg Reflectors for Near-Infrared Wavelength Applications.
Article Snippet: We reported the fabrication and characteristics of distributed Bragg reflectors (DBRs), made of titanium dioxide (TiO2 dense/nanoporous film stacks, operating in the near-infrared wavelength region of 0.8–1.1 m. To form the nanoporous TiO2 films with a low refractive index (low-n), the oblique angle deposition (OAD) technique was employed at a high incident vapor flux angle of 80 .. For the fabricated DBRs consisting of TiO2 dense/nanoporous (high-n/low-n thin films, the high reflectance band was gradually increased and the stop bandwidth was narrowed with increasing the number of DBR pairs.. Particularly, the TiO2 DBR with only 6 pairs exhibited a normalized stop bandwidth ( / c) of ∼11.6% at a center wavelength ( c of 0.96 m as well as high reflectance values of >95% over a wide mid-infrared wavelength region of 0.9–1.01 m (i.e., = 0 111 m).

Article Title: Efficiency Enhancement of Organic Solar Cells Using Hydrophobic Antireflective Inverted Moth-Eye Nanopatterned PDMS Films
Article Snippet: There is increasing interest in organic solar cells (OSCs) based on conjugated polymers due to their promising potential for future energy sources with low cost, high throughput, light weight, and superior mechanical fl exibility.. [ 1–3 ] Recently, Heliateck in Germany demonstrated an OSC with a power conversion effi ciency (PCE) of 12%, which represents the current worldrecord value for OSCs.. [ 4 ] However, this value is much lower compared to inorganic multi-junction solar cells, where PCE can exceed 40%.

Article Title: Tunable distributed Bragg reflectors with wide-angle and broadband high-reflectivity using nanoporous/dense titanium dioxide film stacks for visible wavelength applications
Article Snippet: The theoretical analysis on the optical properties of the fabricated TiO2 DBRs was carried out by the RCWA method using a commercial software (DiffractMOD 3.1, Rsoft Design Group).

Article Title: PDMS-based triboelectric and transparent nanogenerators with ZnO nanorod arrays.
Article Snippet: Vertically-grown ZnO nanorod arrays (NRAs) on indium tin oxide (ITO)-coated polyethylene terephthalate (PET), as a top electrode of nanogenerators, were investigated for the antireflective property as well as an efficient contact surface in bare polydimethysiloxane (PDMS)-based triboelectric nanogenerators.. Compared to conventional ITO-coated PET (i.e., ITO/PET), the ZnO NRAs considerably suppressed the reflectance from 20 to 9.7% at wavelengths of 300−1100 nm, creating a highly transparent top electrode, as demonstrated by theoretical analysis.. Also, the interval time between the peaks of generated output voltage under external pushing forces was significantly decreased from 1.84 to 0.19 s because the reduced contact area of the PDMS by discrete surfaces of the ZnO NRAs on ITO/PET causes a rapid sequence for triboelectric charge generation process including rubbing and separating.

Article Title: Broadband and omnidirectional highly-transparent coverglasses coated with biomimetic moth-eye nanopatterned polymer films for solar photovoltaic system applications
Article Snippet: Highly-transparent coverglasses coated with broadband and omnidirectional antireflective (AR) motheye nanopatterned ultra-violet (UV) curable polymer, i.e., Norland Optical Adhesive (NOA) 63, films are reported.. The moth-eye nanopatterns on the NOA63 polymer films/glasses are transferred from the silicon molds with conical nanogratings (NGs) using poly-dimethylsiloxane stamps by a soft imprint lithography technique.. For the NOA63 NGs/glasses, surface wetting behaviors, UV radiation/thermal effects, and optical properties, together with theoretical analyses using rigorous coupled-wave analysis calculations, are investigated.

Article Title: Improvement in light harvesting of dye-sensitized solar cells with antireflective and hydrophobic textile PDMS coating by facile soft imprint lithography
Article Snippet: We demonstrated the improved conversion efficiency (η) of dyesensitized solar cells (DSSCs) using the textile-patterned polydimethylsiloxane (PDMS) antireflection layers prepared by metalcoated textile master molds by a simple soft imprint lithography.. When light propagates through the textile-patterned surface of PDMS (i.e., textile PDMS) laminated on the outer glass surface deposited with fluorine-doped tin oxide (i.e., FTO/glass), both the transmitted and diffused lights into the photo-anode of DSSCs were simultaneously enhanced.. Compared to the bare FTO/glass, the textile PDMS increased the total transmittance from 82.3 to 85.1% and its diffuse transmittance was significantly increased from 5.9 to 78.1% at 550 nm of wavelength.

Article Title: Transmittance enhancement of sapphires with antireflective subwavelength grating patterned UV polymer surface structures by soft lithography
Article Snippet: For the theoretical optical analysis of SWGs on SU8 film/sapphires, the modeling and simulation were performed based on the RCWA method using a commercial software (DiffractMOD 3.1, Rsoft Design Group).

Software:

Article Title: Broadband and wide-angle antireflective characteristics of nanoporous anodic alumina films for silicon-based optoelectronic applications
Article Snippet: technological interest in most of the above applications [1–6].. In these applications, it is very crucial to enhance the light extraction or absorption efficiency of the devices.. However, a flat Si surface has high inherent reflectivity of >30 % due to its high refractive index (nSi > 3.4) at visible and near-infrared (NIR) wavelengths, which can degrade the device performance due to the optical losses caused by the Fresnel surface reflection.

Article Title: Nanoporous TiO2-Based Distributed Bragg Reflectors for Near-Infrared Wavelength Applications.
Article Snippet: We reported the fabrication and characteristics of distributed Bragg reflectors (DBRs), made of titanium dioxide (TiO2 dense/nanoporous film stacks, operating in the near-infrared wavelength region of 0.8–1.1 m. To form the nanoporous TiO2 films with a low refractive index (low-n), the oblique angle deposition (OAD) technique was employed at a high incident vapor flux angle of 80 .. For the fabricated DBRs consisting of TiO2 dense/nanoporous (high-n/low-n thin films, the high reflectance band was gradually increased and the stop bandwidth was narrowed with increasing the number of DBR pairs.. Particularly, the TiO2 DBR with only 6 pairs exhibited a normalized stop bandwidth ( / c) of ∼11.6% at a center wavelength ( c of 0.96 m as well as high reflectance values of >95% over a wide mid-infrared wavelength region of 0.9–1.01 m (i.e., = 0 111 m).

Article Title: Efficiency Enhancement of Organic Solar Cells Using Hydrophobic Antireflective Inverted Moth-Eye Nanopatterned PDMS Films
Article Snippet: There is increasing interest in organic solar cells (OSCs) based on conjugated polymers due to their promising potential for future energy sources with low cost, high throughput, light weight, and superior mechanical fl exibility.. [ 1–3 ] Recently, Heliateck in Germany demonstrated an OSC with a power conversion effi ciency (PCE) of 12%, which represents the current worldrecord value for OSCs.. [ 4 ] However, this value is much lower compared to inorganic multi-junction solar cells, where PCE can exceed 40%.

Article Title: Tunable distributed Bragg reflectors with wide-angle and broadband high-reflectivity using nanoporous/dense titanium dioxide film stacks for visible wavelength applications
Article Snippet: The theoretical analysis on the optical properties of the fabricated TiO2 DBRs was carried out by the RCWA method using a commercial software (DiffractMOD 3.1, Rsoft Design Group).

Article Title: PDMS-based triboelectric and transparent nanogenerators with ZnO nanorod arrays.
Article Snippet: Vertically-grown ZnO nanorod arrays (NRAs) on indium tin oxide (ITO)-coated polyethylene terephthalate (PET), as a top electrode of nanogenerators, were investigated for the antireflective property as well as an efficient contact surface in bare polydimethysiloxane (PDMS)-based triboelectric nanogenerators.. Compared to conventional ITO-coated PET (i.e., ITO/PET), the ZnO NRAs considerably suppressed the reflectance from 20 to 9.7% at wavelengths of 300−1100 nm, creating a highly transparent top electrode, as demonstrated by theoretical analysis.. Also, the interval time between the peaks of generated output voltage under external pushing forces was significantly decreased from 1.84 to 0.19 s because the reduced contact area of the PDMS by discrete surfaces of the ZnO NRAs on ITO/PET causes a rapid sequence for triboelectric charge generation process including rubbing and separating.

Article Title: Broadband and omnidirectional highly-transparent coverglasses coated with biomimetic moth-eye nanopatterned polymer films for solar photovoltaic system applications
Article Snippet: Highly-transparent coverglasses coated with broadband and omnidirectional antireflective (AR) motheye nanopatterned ultra-violet (UV) curable polymer, i.e., Norland Optical Adhesive (NOA) 63, films are reported.. The moth-eye nanopatterns on the NOA63 polymer films/glasses are transferred from the silicon molds with conical nanogratings (NGs) using poly-dimethylsiloxane stamps by a soft imprint lithography technique.. For the NOA63 NGs/glasses, surface wetting behaviors, UV radiation/thermal effects, and optical properties, together with theoretical analyses using rigorous coupled-wave analysis calculations, are investigated.

Article Title: Improvement in light harvesting of dye-sensitized solar cells with antireflective and hydrophobic textile PDMS coating by facile soft imprint lithography
Article Snippet: We demonstrated the improved conversion efficiency (η) of dyesensitized solar cells (DSSCs) using the textile-patterned polydimethylsiloxane (PDMS) antireflection layers prepared by metalcoated textile master molds by a simple soft imprint lithography.. When light propagates through the textile-patterned surface of PDMS (i.e., textile PDMS) laminated on the outer glass surface deposited with fluorine-doped tin oxide (i.e., FTO/glass), both the transmitted and diffused lights into the photo-anode of DSSCs were simultaneously enhanced.. Compared to the bare FTO/glass, the textile PDMS increased the total transmittance from 82.3 to 85.1% and its diffuse transmittance was significantly increased from 5.9 to 78.1% at 550 nm of wavelength.

Article Title: Transmittance enhancement of sapphires with antireflective subwavelength grating patterned UV polymer surface structures by soft lithography
Article Snippet: For the theoretical optical analysis of SWGs on SU8 film/sapphires, the modeling and simulation were performed based on the RCWA method using a commercial software (DiffractMOD 3.1, Rsoft Design Group).



Similar Products

90
Rsoft Inc cad layout in diffractmod 3.1
Cad Layout In Diffractmod 3.1, supplied by Rsoft Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/diffractmod+3%2E1/diffractmod+3+1/pm36577167-103-44-40
Average 90 stars, based on 1 article reviews
cad layout in diffractmod 3.1 - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Synopsys Inc rcwa software diffractmod 3.1
Rcwa Software Diffractmod 3.1, supplied by Synopsys Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/diffractmod+3%2E1/rcwa+software+diffractmod+3+1/pm26800204-36-7-13
Average 90 stars, based on 1 article reviews
rcwa software diffractmod 3.1 - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Rsoft Inc diffractmod 3.1
Diffractmod 3.1, supplied by Rsoft Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/diffractmod+3%2E1/diffractmod+3+1/pm26682392-43-18-20
Average 90 stars, based on 1 article reviews
diffractmod 3.1 - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

Image Search Results